| INSULATION CABLES AND
CORDS |
|
Type Designation
|
Rated
Voltage |
Conductors |
Construction |
| Number |
Sectional (mm2) |
 |
| Designation - H03VV-F |
300/300 V
|
2
3
4 |
0.5 to 0.75
0.5 to 0.75
0.5 to 0.75
|
- Flexible copper conductor
- PVC insulation
- PVC sheath
|
| Standard - VDE 0281, also
IEC, BS, NFC |
| Type - Light PVC sheathed
cord |
 |
| Application and Remarks: In dry
locations /homes, offices/, for light electrical equipment with low mechanical
stresses. |
|
|
| Designation - H05S-K |
300/500 V |
1 |
0.5 to 2.5
|
- Flexible copper conductor, plain or tinned
- Silicone-rubber insulation
|
| Standard - VDE 0282 part 506 |
| Type - Heat resistant flexible
conductor |
 |
| Application and Remarks:
For internal wiring of equipment, switching systems and other. Working
temperature 180 C. |
|
|
| Designation - H05V-K |
300/500 V
|
1 |
0.5 to 1
|
- Flexible copper conductor
- PVC insulation
|
| Standard - VDE 0281, also
IEC,BS |
| Type - Single-core nonsheathed
cable |
 |
| Application and Remarks: For internal
wiring of equipment and protected installation in and on luminaries. Also
for installation conduit on and under plaster, but only for signaling
systems. In damp, wet, location, outdoor, in area with fire and explosion
hazard - not permitted. |
|
|
| Designation - H05V-U |
300/500 V
|
1 |
0.5 to 1
|
- Solid copper conductor
- PVC insulation
|
| Standard - VDE 0281, also
IEC,BS |
| Type - Single-core nonsheathed
cable |
 |
| Application and Remarks: For internal
wiring of equipment and protected installation in and on luminaries. Also
for installation conduit on and under plaster, but only for signaling
systems. In damp, wet, location, outdoor, in area with fire and explosion
hazard - not permitted. |
|
|
| Designation - H07V-K |
450/700 V
|
1 |
1.5 to 240
|
- Flexible copper conductor
- PVC insulation
|
| Standard - VDE 0281, also
IEC, BS |
| Type - Single-core nonsheathed
cable |
 |
| Application and Remarks: In conduits
on or under plaster /only in plastic conduit in bathrooms and shower compartment
in insulatiors over plaster beyond arm's reach. In equipment switchboards
and distribution boards and or on luminaries with rated voltage of up
to 1000 V a.c. or 750 V d.c. to earth. For use in rail vehicles the d.c.
operation voltage may be up to 900 v to earth. Outdoor installation -
not permitted. |
|
|
| Designation - H07V-U |
450/700 V
|
1 |
1.5 to 16
|
- Solid copper conductor
- PVC insulation
|
| Standard - VDE 0281, also
IEC, BS |
| Type - Single-core nonsheathed
cable |
 |
| Application and Remarks: In conduits
on or under plaster /only in plastic conduit in bathrooms and shower compartment
in insulatiors over plaster beyond arm's reach. In equipment switchboards
and distribution boards and or on luminaries with rated voltage of up
to 1000 V a.c. or 750 V d.c. to earth. For use in rail vehicles the d.c.
operation voltage may be up to 900 v to earth. Outdoor installation -
not permitted. |
|
|
| Designation - SIF , SID |
300/500 V
|
SID
SIF |
0.5 to 6
0.5 to 35
|
- Temperature range: -60 C to 180 C
- Conductor: SID - tinned annealed coppeer solid conductor
SIF - tinned annealed copper, class 5 flexible conductor
- Insulation: silicone rubber type EI 2
|
| Standard - BS 6007 |
| Type - Single core silicone
rubber insulated cable |
 |
| Application and Remarks:
Recommended for use situation where heat or the interacion of axtremely
high and low temperatures rapidly causes cable insulation to become brittle
and inflexible.These special cables have become an essential element in
a wide range of industrial sectors, including founries, steel and hot-rolling
mills, coking plants, cement, glass and ceramics factories, in electric
motors, ship and aircraft construction, on extruders, in heating and lighting
systems, bakery machinery, oil burners, solaria, sauna systems and in
many other areas. |
Photo Gallery